These chemical products contain ingredients such as surfactants, additives, and enzymes. They can effectively remove stains, oils, dirt and other substances. Meanwhile, they also have functions such as softening, whitening and disinfection to meet different washing needs.
Chemical formula: Na₁₂(AlO₂)₁₂(SiO₂)₁₂·27H₂O
Package: 40kg/50kg woven bag/650kg jumbo bag
It can effectively remove calcium and magnesium ions in water, thereby reducing the hardness of water and improving the decontamination effect of detergent.
Prevent the dirt from washing down to redeposit on the clothes, keep the clothes clean.
Synergies with other detergent ingredients to improve overall decontamination and cleaning performance.
Because it is relatively friendly to the environment, it can be used as a substitute for traditional additives such as sodium tripolyphosphate to reduce the negative impact of detergents on the environment.
| PARAMETERS | VALUE |
|---|---|
| Appearance and colour | White powder |
| Ca ion exchange Capacity(dry) | 310mgCaCO3/g MIN |
| White grade(w=y) | 95% MIN |
| WATER | 20-22 |
| PH (suspension 1%,25。 C) | 11 MAX |
| Ignition Loss(800。 C 60min) | 20+-0.5 |
| WATER | 20-22 |
| Particle size(micron meter):D50(Average particle size) | 3-5um |
| Bulk density | 500g/l MAX |
| AL2O3 | 28-30 |
| SiO2 | 31-34 |
| Na2O | 17-19 |
The relative humidity is not more than 90% of the indoor humidity.
This zeolite should be far away from water, acid and alkali.
Air isolation and sealing is quite necessary for storage.
Chemical formula: NaOH
Package: 25kg bag
Effectively remove grease, proteins and other stubborn stains.
For sewers clogged by grease and hair, the appropriate amount of caustic soda solution can dissolve the blockage and play the role of clearing. Such as kitchen stoves, range hoods and others on heavy oily surfaces, caustic soda solution can effectively break down oil.
It should be noted that caustic soda is highly corrosive. The concentration must be strictly controlled when it is used.
Protective measures must be taken to avoid direct contact with the skin and eyes to avoid serious injury.
Caustic Soda Flakes 98%, 98.5%, 99%
| TEST ITEM | STANDARD |
|---|---|
| NAOH | 98% MIN |
| NA₂CO₃ | 0.5% MAX |
| NACL | 0.05% MAX |
| FE₂O₃ | 0.005% MAX |
| SURFACE | WHITE FLAKES |
Chemical formula: NaOH
Package: 25kg bag
Effectively remove grease, proteins and other stubborn stains.
For sewers clogged by grease and hair, the appropriate amount of caustic soda solution can dissolve the blockage and play the role of clearing. Such as kitchen stoves, range hoods and others on heavy oily surfaces, caustic soda solution can effectively break down oil.
It should be noted that caustic soda is highly corrosive.The concentration must be strictly controlled when it is used.
Protective measures must be taken to avoid direct contact with the skin and eyes to avoid serious injury.
Caustic Soda Pearls 99%
| TEST ITEM | STANDARD |
|---|---|
| NATIONAL STANDARD | GB209-2006 |
| NAOH | 99%MIN |
| NA₂CO₃ | 0.5% MAX |
| NACL | 0.03%MAX |
| FE₂O₃ | 0.005% MAX |
| SUFACE | WHITE PEALRS |
Chemical formula: –
Package: 25kg bag
They are usually solid particles made of various chemical components by mixing, granulation and other processes.
The size, shape and structure of washing powder particles will affect the solubility, dispersion and decontamination ability of washing powder.
In general, smaller particles are easier to dissolve and disperse, but may be prone to dust during production, storage, and transportation; Larger particles are less soluble, but may have better fluidity and stability.
The ingredients of washing powder particles usually include surfactants, washing AIDS (such as 4A zeolite, sodium carbonate, etc.), enzymes, whitening agents, spices, etc.
These ingredients work together to achieve the purpose of removing stains and cleaning clothes.
| Appearance |
Flow freely no agglomeration speckle |
|---|---|
| Odor | No peculiar smell |
| Apparent gravity | 800～1200g/l |
| Time of solution s | ≤300 |
| Particle size≥1.43mm（14mesh） % | ≤5.0 |
| Particle size0.45-1.43mm（14—40mesh） % | ≥80 |
| Particle size≤0.30mm(60mesh) % | ≤10.0 |
| PHvalue（1%aqueous，25℃） | 7.0～12.0 |
| Loss on drying % | ≤8.0 |
Chemical formula: C₁₀H₁₆N₂O₈
Package: 25kg bag
It can form stable complexes with calcium, magnesium and other metal ions in water, reduce the hardness of water, and improve the decontamination effect of detergent. Effectively remove stains caused by metal ions on clothing, such as rust.
Prevent the damage of metal ions to the fabric, maintain the color and strength of the fabric.
Helps maintain the stability and activity of other ingredients in the detergent.
| APPEARANCE | White crystalline powder |
|---|---|
| рН 5% р-р 25°C | 2.6—3.2 |
| Purity % | ≥99.0 |
| Chelate Value(mg/g) min | 339 |
| Heavy metals (as Pb) % | ≤0.001 |
| Fe, % | ≤0.001 |
| Chlorides, % | ≤0.05 |
| Sufate, % | ≤0.001 |
Chemical formula: C₁₈H₃₀O₃S
Package: 215kg drum/1050kg IBC drum
With a strong decontamination ability, it can effectively remove various stains from the surface of clothing, tableware and so on, including grease, protein and dust.
It emulsifies and dispers oily stains in water,making them easy to be washed off.
It helps the detergent to penetrate into the fabric fiber better and improve the cleaning effect.
It works in concert with other surfactants to produce a stable and rich foam to enhance the experience of the washing process.
The pH of the washing liquid can be adjusted to create a suitable chemical environment for other ingredients to work.
Due to its relatively low cost and good performance, it is an important ingredient of many economical detergents.
LABSA 96%
| STANDARD | GB/T8447-2008 |
|---|---|
| ITEM | GUARANTEED |
| APPEARANCE | BROWN LIQUID |
| linear-Alkyl benzene sulfonic Acid%≧ | 96min |
| FREE OIL %≦ | 2.0max |
| FREE SULFURIC ACID %≦ | 1.5max |
| WATER CONTENT % | 1.0max |
| COLOR/Klett ≦ | 60max |
| VISCOSITY(CPS) | 600min |
Chemical formula: Na₂CO₃
Package: 50kg/1000kg bag
It increases the alkalinity of the washing liquid to help remove grease, dirt and protein stains.
It reacts with calcium and magnesium ions in water to reduce their interference with the detergent effect, thereby improving the overall washing performance.
It plays a certain buffering role and maintains the relative stability of pH of the washing liquid.
It has a certain eliminating effect on some odors caused by bacterial growth or other reasons.
Due to the large particle size and high density of soda ash dense, it may have certain advantages in storage, transportation and use.
| ITEMS | SPECIFICATION | ||
|---|---|---|---|
| Total allali content% | 99.2min | ||
| Chloride(NaCl)% | 0.70max | ||
| Iron(Fe2O3)% | 0.0035max | ||
| Sulfate(SO4)% | 0.03max | ||
| Water insoluble matter% | 0.03max | ||
Chemical formula: Na₂CO₃
Package: 25/40/50/1000kg bag
It can undergo saponification reaction with oil and grease, so that oil stains are easy to be cleaned off.
It reduces the concentration of calcium and magnesium ions in water and improves the decontamination effect of detergent.
It increases the alkalinity of the detergent and enhances the decontamination ability, especially for some acidic stains.
It helps eliminate some odors on clothes or items.
It stabilizes the PH of the washing liquid ,makeing the washing process more stable and effective.
Sodium Carbonate, Soda Ash, Disodium Carbonate, Carbonic Acid Disodium Salt
| Soda ash light | specification | ||
|---|---|---|---|
| Total alkali content(Na2CO3 in dry base) | 99.2min | ||
| Chloride content((NaCl in dry base) | 0.70% max | ||
| Iron content(Fe in dry base) | 0.0035% max. | ||
| Sulphate( SO4 in dry base) | 0.03%max | ||
| Water Insoluble matter | 0.03%max | ||
Chemical formula: C₁₂H₂₅O(CH₂CH₂O)ₙSO₃Na
Package: 170kg drum/1100kg IBC
It can effectively remove dirt and grease from the surface of clothing, tableware, and the body.
It provides rich and delicate foam to enhance the sensory experience of the washing process, and indicates the cleaning effect to a certain extent.
It emulsifies and dispers oily stains in water,making them easy to be washed off.
It can be used with other surfactants and auxiliaries to improve the overall cleaning performance.
It is commonly used in a variety of detergents, such as washing powder, dishwashing liquid, shampoo, shower gel and so on.
SLES 70%
| Items | Specification | ||
|---|---|---|---|
| Appearance（25Ċ） | White Or Light Yellow Viscous Paste | ||
| Odor | No Strange Odors | ||
| Active Matter（%） | 68-72 | ||
| Free Oil（%） | Max 3 | ||
| Sodium sulfate（%） | Max 1.5 | ||
| PH Value (25Ċ ,2% sol) | 7.0-9.5 | ||
| Color （Klett,5%Am.aq.sol） | Max 20 | ||
Chemical formula: Na₂SiO₃·5H₂O
Package: 25kg bag
It can effectively remove stains, especially grease and dirt.
It softens water and can be combined with calcium and magnesium ions in the water to reduce the adverse effect of hard water.
Its ability of dispersion and suspension help to disperse dirt in the washing liquid and prevent it from redepositing on the clothing.
It plays a certain role in regulating the pH of the washing liquid and optimizing the washing environment.
It is used with other detergent ingredients to improve the overall washing performance.In some applications, due to their different properties in nature, there may be different applicable scenarios.
For example, in some occasions with high drying requirements or rapid dissolution, sodium metasilicate pentahydrate may be more inclined to be used;
In the case of higher hygroscopic and stability requirements, sodium metasilicate anhydrous may be selected.
Sodium Metasilicate Pentahydrate, Sodium Metasilicate Anhydrous
| Item | Pentahydrate | Anhydrous |
|---|---|---|
| Appearance | White granular | |
| Na2O% min | 28.2 | 50.0 |
| SiO2 % min | 27.8 | 45.0 |
| Fe, PPM max | 80 | 160ppm |
| Bulk density, g/cm3 | 0.85-0.95 | 1.05-1.35 |
| Particle size, 1400μm-425μm (14-40 Mesh) % min | 90 | 85 |
| Whiteness min | 80 | 85.0 |
Chemical formula: Na₂SiO₃
Package: 50kg/1000kg bag
Enhance the decontamination capacity of the detergent to help remove various stains.
It can combine with calcium and magnesium ions in water, reduce the hardness of water, and thus improve the effect of detergent.
It has a certain protective effect on the metal surface and reduces the corrosion of metal parts during the washing process.
Keep dirt particles suspended in the washing solution to prevent them from redepositing on the clothing.
It helps to maintain the stability of the pH of the washing liquid and ensure the activity of the detergent ingredients.
The nature and use of sodium silicate will vary depending on its concentration, modulus (the molar ratio of silicon dioxide to sodium oxide in sodium silicate) and other factors.
Sodium Silicate Solid, Sodium Silicate Powder
| Total Solid min | Alkaline | Neutral |
|---|---|---|
| Total Solid min | 98.5 | 98.5 |
| Sodium oxide(Na2O) % | 30.64-33.80 | 23.6-25.4 |
| Silicon oxide (SIO2) % | 65.50-68.50 | 73.9-77.6 |
| Modulus | 2.0-2.3 | 3.0-3.4 |
| Water insoluble matter % | 0.3 MAX | 0.3 MAX |
| Iron (Fe) % | 0.10 MAX | 0.10 MAX |
| AL2O3 % | 0.5 MAX | 0.5 MAX |
Chemical formula: Na₂SO₄
Package: 25/50/1000kg bag
It can increase the volume of detergent and reduce the cost.
It can be combined with calcium and magnesium ions in water to form insoluble sediments, thereby reducing the hardness of water and improving the decontamination ability of detergents.
It can absorb ultraviolet rays and emit blue fluorescence, making clothes look whiter.
It can adjust the pH of the detergent to make it more stable.
| Test Item | Index Of Standard |
|---|---|
| premium grade one class | |
| Na2SO4 % | 99.0 |
| Water-Insoluble % | 0.05 |
| Ca2 Mg2+ % | 0.15 |
| Cl-% | 0.35 |
| Fe% | 0.002 |
| Water Content % | 0.20 |
| Whiteness % | 82 |
| PH | 6-8/9-11 |
Chemical formula: Na₅P₃O₁₀
Package: 25kg bag
It can form stable complexes with calcium and magnesium ions in water, thereby reducing the hardness of water and making the detergent play a better role.
Improve the decontamination ability of detergents, especially for stains such as grease, protein and dust.
Keep dirt particles clean by dispersing them in the washing solution to prevent them from redepositing on the clothing.
It can buffer the pH of the washing liquid, so that the washing process can be carried out under stable conditions. Synergies with other detergent ingredients to enhance the overall washing effect.
However, because sodium tripolyphosphate can cause environmental problems such as eutrophication of water bodies, its application in detergents has gradually been limited and replaced by some more environmentally friendly alternatives.
| ITEMS | SPECIFICATION |
|---|---|
| Assay Na5P3O10 % ≥ | 94.0 Min. |
| P2 O 5 % ≥ | 57 Min. |
| Water Insoluble Matter % ≤ | 0.1 Max. |
| Iron(Fe) % ≤ | 0.015Max. |
| PH value (1% water solution) | 9.2-10.0 |
| Whiteness % ≥ | 90 Min. |
| Phase I | 15-30 |
| Density | 0.8-1.0 |